Wireless Data Collection using Tempurity™

The Networked Robotics Tempurity™ System uses standard wired, wireless, or ethernet-over-power networks to implement data collection.  With Tempurity all of your freezers will have standard network addresses.  Every freezer becomes part of your standard network and can be communicated to and managed via standard network commands. 

The figure shows the method for establishing wireless data collection with Tempurity.  The system operates through standard, commonly available, and inexpensive wireless bridges or access points available from many vendors.  In the figure wireless is enabled with a device labeled "access point" however both  access points and bridges are acceptable for implementing wireless data collection.

As shown in the figure, sensors are not required for many freezer, incubator, and cryofreezer types.  Our network hardware can acquire data directly from the instrument's data port.

Investigate the Possibilities of Wireless Temperature Monitoring

You can also receive alerts (Networked Robotics calls these "alarm notifications") of e-mail, cell phone text messages, or English voice when temperatures fall outside of the allowed range. In fact, the Tempurity temperature monitoring system alarm notification parameters are customizable from anywhere. You can:

  • Set up wireless alerts to be sent to cell phones by text message or voice
  • Determine who receives these alerts, for what alarm stage, and for what population of monitored devices

With a wireless monitoring system, you can stay on top of things all the time and move quickly to correct problems if they occur.  Now there's no reason not to know. Call Networked Robotics today.

877 FRZ TEMP ( 877 379 8367)

877 GLP TEMP ( 877 457 8367)

Tempurity will collect data from all of your monitored devices, wherever they are in the world. For different perspectives you may wish to read more from specific categories below: